Samsung UN19F4000

Advertisement


Channel Menu
❑ Memorizing Channels
If you are not using a cable box or satellite box, when you first set up
your TV using
Plug & Play
, the TV memorized the channels that were
available over the air or through your cable system and added them to
the
Channel List
. The Antenna and Auto program functions described
below let you re-run the channel memorization function without having to
re-run the Plug & Play procedure.
Antenna (Switch to Cable / Switch to Air t)
Before your television can memorize the available channels, you must
select your TV’s signal source,Air(using an antenna) or Cable
. Select
Menu > Channel
>Antenna>
Air or Cable
. After you have selected the
signal source, go on to the Auto Program function.

Selecting the signal source using the
Antenna
function also
determines the signal source the TV is tuned to. For example, if you
receive your TV signal over the air, and you select
Cable
, you will
see only snow. You must select
Air
to see a picture.
Auto Program
The
Auto Program
function memorizes all channels that are available
over the air or through your cable system and adds them to the
Channel
List
.

If your TV is connected to a cable box or satellite box, you do not
need to run
Auto Program
. You will use the tuner in the box, not the
tuner in the TV, to select channels.
To start
Auto Program
, follow these steps:
1.
Push
MENU
m

Channel

Auto Program

ENTER E on your remote. The Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your TV signal.
Air If your TV is connected to an antenna choose Air
, and then press ENTER E
. The TV will automatically start memorizing channels.
Cable
If your TV is connected to a cable outlet, choose Cable
, and then press ENTER E
. Go to Step 3. Auto
If you choose Auto
, and then press ENTER E
, the TV will
automatically select the correct Antenna source. Go to Step 3.3.
On the Cable Type screen, use the
◄/►/▲/▼
buttons to select the
type of digital and analog cable systems you have:
STD,HRC, orIRC
. Most systems are STD(Standard). When done, select Start, and then press ENTER E
. The TV will start memorizing channels.
✎Channel memorization can take up to 45 minutes, depending on
your cable system.
✎Memorized channels are added to the
Added Channels
list. These are the channels you will see when you use the Channel buttons on
your remote.
Clear Scrambled Channel
This function filters out scrambled channels after
Auto Program is completed. This process may take 20~30 minutes.
✎Press the ENTER E
button to stop Clear Scrambled Channel.
✎This function is only available in Cable mode.

>> Download Samsung UN19F400 manual pdf here!

 

Advertisement

brought to you by manualpdf.net